|
130bbl. VACUUM
TRAILER - NON DOT & DOT 407/412 SPECIFICATIONS
 Click Photo for more
Pic's
Ø
TANK
CAPACITY: 5460
U.S.G. + 3% Outage
Ø
DESIGN:
Design
shall withstand 30 PSI internal pressure and 30SIG external pressure
Ø
HEAD
MATERIAL:
0.250
Mild steel
Ø
SHELL
MATERIAL:
0.250 Mild steel (39’ Long)
Ø
TANK
DIAMETER:
59 1/4D.
Ø
BAFFLE:
Two (2)1/4” with crawl through in lower portion of tank
Ø
RINGS:
3/8 bar reinforcement rings
Ø
SUSPENSION: 4
Spring suspension
Ø
AXLES: 22,500
lbs axle w/ ABS system, Stemco Oil Seals, automatic slack adjusters
Ø
BRAKES: ABS
Anti-Lock system on both axles
Ø
RIMS: 11:00 x
24.5 tubeless, 10 hole Bud wheel
Ø
TIRES: 11:00 x
24.5 Tubeless radials
Ø
VENT
LINE: 2” Pipe
from scrubber to the rear of tank w/ball valve and Vac/pressure gauge
Ø
WALKWAY
& LADDER: Full
length with handrail and rear entry ladder
Ø
LANDING GEAR: 2 speed
H.D. 50,000# w/sand feet
Ø
MUD
FLAPS: Anti-sail
Ø
SUMP: V- sump
welded in lower rear of tank
Ø
UNLOADING VALVE: 2- 4"
at rear of tank with butterfly valves
Ø
MANWAYS: 2-20"
diameter domed manways located top of tanK
Ø
REAR
CLEANOUT: 20”
full opening domed rear cleanout assembly
Ø
LIGHTING: 12volt
sealed tail lights and side marker lights meeting Federal DOT Safety standards
Ø
BUMPER: Steel
channel w/heavy duty tow hooks meets FMVSS-223
Ø
SIDE
TRAYS: Full
length combination
Ø
PRIMARY SHUT-OFF: 3 heavy
duty internal shut-off / cage assembly and neoprene rubber seat top front
Ø
SECONDARY SHUT-OFF: Outside
scrubber with dome lid for easy clean out with 2” drain
Ø
RELIEF VALVES:
2”
Pressure relief valve mount top at front manway, 1” vacuum relief valve
Ø
SIGHT GLASS: One (1)
Located rear tank head
Ø
PAINTING:
Sandblast, paint one single color (White)
Ø
ADDITIONAL ITEMS INCLUDED: 2 work
lights, 1- Tool box 18”x18”x36”
Ø
OPTIONAL COATINGS: Interior of tank sandblasted and coated with, Phenolic Epoxy
or Tnemec 120 or 390
130bbl. DOT 407/412 VACUUM TRAILER
130bbl. (5460gl.) DOT 407/412 Vacuum Trailer,
Spring suspension, 11R24.5 tires, Full length walkway with
handrails, (2) – 4” butterfly valves with air to open spring
to close at rear, (3) – 20”
diameter DOT certified National
Vacuum domed man-ways, (1) 20”
diameter DOT certified National Vacuum domed
man-way located on lower rear
head, 12” Heavy duty DOT internal shut-off at top front of
tank, Outside scrubber with dome lid and 2” drain,
Girard 3” relief valve,
Front, center, and rear overturn protection, External
arrow rotary float gauge with 8” stainless steel
float ball, 18” x 18” x 36”
toolbox with locking latch (2) work lights with on/off
switch located at rear, Optional:
Interior of tank sandblasted and coated with, Phenolic Epoxy or Tnemec 120 or
390
*
Full Opening rear heads available.
Tiger Mfg. holds a A.S.M.E. U stamp and T Stamps, National Board of Boiler
& Pressure Vessel Inspectors R Stamp / Full DOT Facility
& DOT Inspectors / N.T.T.C. Associate Member / KV Test-Single/Multi
Compartment / PIKV Test-Single/Multi Compartment / PI
Test-Single/Multi Compartment / IKV Test-Single Compartment / Lining
Inspections / Thickness Testing / Upper Coupler Testing / Wet
Testing / Propane Testing / Vapor Testing
2631 FM 3034
Abilene, TX 79601
Phone: (325) 677-2112
Web site contents © Copyright Tiger Manufacturing Co. 2009-2010, All
rights reserved.Website Design by JST
|
