|
80bbl. VACUUM TANK SYSTEM - NON DOT & DOT
407/412 SPECIFICATIONS
 Click Photo for more Pic's
*Other sizes available.
Ø
TANK CAPACITY:
3360 U.S.G. + 2% Outage (80 BBL)
Ø
DESIGN: Design shall withstand 30
PSI internal pressure and 15 PSIG external pressure (full
vacuum)
Ø
HEAD MATERIAL:
0.250
Ø
SHELL MATERIAL:
0.250 15’ Seam to Seam
Ø
TANK DIAMETER: 72"
O.D.
Ø
PUMP
SPECIFICATIONS: Jurop R-260 Vacuum/Pressure pump
Ø
DRIVE: Right Angle
Drive
Ø
PRIMARY SHUT-OFF:
1-20” on top front w/ Float Ball Shut-off
Ø
SECONDARY SHUTOFF:
Exterior moisture trap assembly with 1 drain valve
Ø
BAFFLE: Two anti
surge (dished and flared)
Ø
OUTLET VALVE: 2-
4” Butterfly valve out of wedge style sump with camlock, dust cover and chain.
Ø
MANWAY: 2-20"
diameter located top of tank
Ø
CLEANOUT: 1-20” at
lower rear of tank
Ø
LIQUID LEVEL
INDICATOR: 1- 1 ½” Sight tube with valves top and bottom mounted front tank head
Ø
PRESSURE RELIEF:
1-1” valve
Ø
VACUUM RELIEF:
1-1” Valve
Ø
FRAME: Full length
with slope to rear
Ø
GAUGES: Pressure /
Vacuum
Ø
SIDE TRAYS: Full
length combination skirt, and hose carrier
Ø
LADDER: Rod style
ladder to manway (drivers side)
Ø
Sandblasted,
Primed and painted one standard color (Your Choice)
*Optional Interior tank coating, Epoxy or Tnemec 120 or 390
* Custom built tank sizes, 50 to 100bbl.
DOT 407/412 VACUUM TANKS
60-100bbl. DOT 407/412 Vacuum
Tanks, Design pressure – Internal 25psi External 15psi, ¼” Shell Grade SA-36, ¼”
heads Grade SA-36, One ¼” baffle with crawl through, 3/8” flat bar reinforcement
rings, 4” Girard DOT low profile relief valve, Roll over protection at front,
center and rear, ASME code National vacuum 20” primary shutoff with 6” stainless
steel float ball, National vacuum 10 gallon secondary shutoff with 6” stainless
stell float ball, Two ASME code national vacuum 20” man-ways on top of tank, One
ASME national vacuum 20” man-way on rear head, Full length walkway with ladder
near center of tank, full length hose tray fender combination mounted on each
side, Cat walk on drivers side, two air/spring 4” butterfly valves out of rear
sump, External arrow rotary float gauge with 8” stainless steel float ball, 12V
DC sealed LED tail lights and side marker lights, Exterior of tank sandblasted
and painted One standard color.
60-80bbl. TILT VACUUM TANKS
80bbl. Full Tilt Vacuum Tank Hydraulic driven,
Controls on driver side, 3,360 Gallons, 1/4" Head & Shell Thickness, Primary &
Secondary Shutoff, (2) Top Man Ways, (1) 36" Rear oversized Clean Out hyd.
operated, (2) Internal Baffles, Sump With (2) 4" Rear Outlets With Wafer Style
Butterfly Valves, Front Sight Glass, Vacuum & Pressure Relief Valves, Full
Length Hose Trays, Rear Bumper,
12V DC sealed LED tail lights and
side marker lights, Exterior of tank sandblasted and painted One standard color.
Tiger Mfg. holds a A.S.M.E. U and T Stamps, National Board of Boiler & Pressure Vessel Inspectors R Stamp / Full DOT Facility
& DOT Inspectors / N.T.T.C. Associate Member / KV Test-Single/Multi
Compartment / PIKV Test-Single/Multi Compartment / PI
Test-Single/Multi Compartment / IKV Test-Single Compartment / Lining
Inspections / Thickness Testing / Upper Coupler Testing / Wet
Testing / Propane Testing / Vapor Testing
2631 FM 3034
Abilene, TX 79601
Phone: (325) 677-2112
Web site contents © Copyright Tiger Manufacturing Co. 2009-2010, All
rights reserved.Website Design by JST
|
