PRODUCT SHOWCASE

Tiger Manufacturing's line of 17 bbl Mini-Vac bumper pull systems are ready to serve all your environmental clean-up needs. Our tank is conveniently mounted on a bumper pull trailer and powered with a DEUTZ diesel engine and a Massport vacuum pump.

The 2,000 gallon capacity water truck offers both convenience and performance in any industry. Having a smaller capacity enhances the ability to go into tighter spaces, making this in irreplaceable piece of equipment in any fleet.

Our 4,000 gallon water truck boasts it's usefulness in both highway and residential areas. Having a larger capacity helps eliminate the need for constant refilling and time spent off-site. That capacity doesn't mean more time filling however, our truck only needs a few minutes.

Please call for complete specification and customization options.

We offer top-of-the-line 60 gallon chemical tanks that come equipped with air open and close sight glass valves, protected by steel guards, and decals for level indication in 1 gallon increments. Each tank also features a Clay & Bailey 3-1/2" vent, ensuring optimal ventilation.

Our custom transfer/charge pump trailer is the ideal solution for moving large volumes of fluids quickly and easily. With a Gorman Rupp 10 x 8 centrifugal pump, twin disc PTO clutch transmission and sucker cooling system, this trailer is designed to provide reliable performance.

Our standard design includes a full length tapered frame for offloading, combination fenders and hose trays, full length walkway to access both manways, and a rear manway cleanout.

Our standard design includes combination fenders and hose trays, a walkway to access primary and secondary shutoffs, a hydraulic driven vacuum pump, and liquid level indication systems. The design has a 45 degree tilt for offloading and a 90 degree full opening rear head.

Our standard design includes combination fenders and hose trays, full length rear entry walkway to access manways, and a rear manway cleanout. They are a single compartment with 2 full baffles and come equipped with tandem air-ride suspension.

Our tanks come in single, double, or triple compartment, while meeting DOT 407-412 specs. They can easily handle some of the harshest chemicals to meet your needs.

Our DOT 412 compliant tanker has a 5,000-gallon capacity with a 2,000-gallon front and 3,000-gallon rear split. It features a UHMW manway with a fiberglass drip pan, Ridewell air ride suspension, and 22,500 lb. axles with ABS. The tanker comes standard with roll-over rails, hose racks, a driver side walkway and lots more.

Our Twin 420/750 Gallon Tanks meet DOT 412 specs and comes with Tnemec 390 interior coating, 3" flanged Girard venting with Teflon lining and overturn protection covers. These tanks can come mounted to a plate for your flatbed, or with two cradle mounts.

These drop-on water tanks have been perfectly engineered to remove the headache of dealing with new equipment. We've made it so you can drop one of our tanks onto an existing chassis and get right back to work.

Tiger's ESP Spool Trailers are purpose built in-house and are not modified from a stock trailer. This design tactic allows for a lower center of gravity to mitigate rollover potential. With a 30K lb. GVWR, 18K lb. per axle capacity, spool sizes up to 84" diameter and 62" wide, our trailers will get any job done.

Our Frac Tank Mover Truck is the ultimate tool for the task at hand. A RUFNECK RN-50 winch paired with an Intelliguard controller, hydraulic driven planetary and full square tubing headache rack give you everything you need to move any tanks.

Invest in our gel slurry trailer, the solution to your transportation needs. Its impressive capacity of 4,000 gallons is complemented by features such as four hydraulic driven augers, 2" micro motion flow meter and two 18" Clay & Bailey manways on top. Supported by Ridewell air ride with two 25,000 lb. axles, ensuring that your cargo is in safe hands.

The high-pressure chemical pumping truck is exactly what you need for your toughest chemical jobs. Our Triplex high-pressure pump can produce up to 10K PSI of pressure and comes equipped with hydraulic-driven charge and mixing pumps.

Get the job done right with our Hot Oil Truck. Equipped with a Heat Exchange System and a Tee 5 Gardner Denver High Pressure Pump, this truck is the ultimate solution for all your hot oil needs. With a 75 bbl round service tank, low and high pressure manifolds and load circulating pump, our hot oil truck is designed to work as hard as you do.

Our center of gravity is 15.5" lower than the industry standard tankers which reduces the risks for your drivers, trailers and cargo. These factors positively affect the cost of lives, time and money by minimizing the risk involved and creating a safer environment for transport.

Our standard design includes a full length tapered frame for offloading, combination fenders and hose trays, full length walkway to access both manways, and a rear manway cleanout.

Our Off-Road Vacuum Tanks are built to last in harsh environments and can handle large payloads. The tank size can be customized to meet the needs of your toughest jobs. The tank shown has a capacity of 5,500 gallons. It loads/unloads with a Masport Cobra vacuum pump that moves 532 CFM of air to make quick work of any job.

There is no substitute when it comes to the workhorse of an off-road water truck. Each of our trucks is manufactured to order, which provides you with the ability to choose exactly what goes in or on your unit.

Our Pickup/Laydown Truck is equipped with a powerful 50 series or 30 series winch. Allowing it to efficiently move the heaviest of loads. Additionally its roller assembly, lightweight grating and hydraulic rake system ensure that loading and unloading are done smoothly.

Our standard elliptical dump beds are designed to cater to your needs, with a range of sizes available in 10, 12, 14 and 16 feet. Equipped with an air latch swing gate and coming with an installation kit, you can trust that our dump beds are the perfect solution for any job.

Our T660 ASME Pneumatic Bulk Trailer is the ultimate solution for your heavy-duty transportation needs. Featuring a manifold 4” fill, 5” discharge suction union and single point suspension with a 50,000 lb spring. With a maximum pressure of 36 PSIG from -20°F to 250°F, the trailer guarantees safety and efficiency with every job.

Our single axle treater truck comes in a 30 or 50 BBL size. The flush tank comes in stainless steel, keeping the truck light and offering protection against corrosive agents. A hydraulic drive pump comes standard with the truck and allows for a six or twelve pack configuration.